Milling and Harvesting

It was a big weekend for homebrew production. I built a malt mill and harvested my cascade hops! I based my malt mill on the barebones version of Jack Schmidling's MaltMill.
Barebones Malt Mill (from Jack Schmidling Productions, Inc.)

I had to build the table and the hopper, but the money I saved in doing it myself, I was able to buy an electric drill to motor the whole contraption. I used medium density fiberboard for the table and the sides of the hopper. I used a lightweight smooth fiberboard with staples for the hopper. I added dropped edges on the table so it fits snugly on top of a bucket. I bolted the mill onto the table with 1/4" bolts and the hopper attaches to the top with 1/4" bolts.
This malt mill holds 12.5 pounds of uncrushed grain.

Gorilla glue sealed the edges inside the hopper where I narrowed the chute.

The hop harvest was outstanding. We clipped the vine down and brought it over to the deck where we began picking. There were so many flowers it was quite a chore for two people. I did not expect this quantity! The net product was half a paper grocery bag.

To dry them out we first cut paper bags in the shape of a bin and covered them, leaving plenty of breathing room.

It was a long weekend, so I decided to put together a proper hop bin, with a screened bottom for faster drying. They will sit in the sun room for 3 days or so and then be packed and frozen.